Serving South Florida Since 2002

"Light Up Your Life"

Palm Beach | Broward    Dade | Martin | St. Lucie | Collier & Lee Counties

☏  561.204.3000

♦For your safety and to avoid scams, always make sure your lighting contractor is licensed & insured – It’s the law in Florida ( CLA: ES12001382)♦

Meet the Custom Lighting of America Design Team

February 16, 17 & 18, 2024

West Palm Beach Fall Home Show

South Florida Expo Center at The South Florida Fair Grounds

Learn Why Our landscape Lighting Installation Sets a New Standard of Excellence for Unique Manufacturing Lighting Systems.

Not all landscape lighting installations are the same, especially with higher wattage installations like Unique Lighting Fixtures. With over 20 years of experience designing and installing low voltage outdoor landscape lighting systems from Jupiter to Delray Beach and throughout most areas in South Florida, Custom Lighting of America’s professional installers have learned a thing or two along the way that sets us apart from the competition and adds value to your lighting installation..

A prime example is our premium installation method that we call the CLA-HUB Wiring System that Custom Lighting of America uses whenever we install components from Unique Lighting Manufacturing. Unique makes premium brass casted fixtures that typically run at a higher wattage than other systems. The CLA-HUB Wiring System is the ultimate In-Line fuse-protected wiring system these high wattage systems. Allowing us to size the fuse according to load or wire size, thus making troubleshooting accessible, convenient, and fast. You wouldn’t purchase a home or an automobile without fuse protection, we feel your outdoor lighting system warrants the same respect!

Why the CLA-HUB System is better?

Wire connections are the weakest point of any low voltage installation and are susceptible to wicking and water infiltration. Utilizing the the CLA-HUB installation method reduces the number of connections by up to 80% versus standard wiring methods. This means less maintenance, less lamp outages and easier troubleshooting. In addition the CLA-HUB method utilizes less wire and saves you money.

• Each CLA-HUB acts as a central location for connections, taking the guess work out of troubleshooting
• Protect connections from moisture to minimize wicking and corrosion
• Reduce the number of connection points, wire and labor
• Distribute proper voltage evenly to every fixture
• Flexibility in fixture location and future expansion

  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest

How the CLA-HUB System works.

Competitors wiring systems typically use one of three methods of installation, the “T”, Daisy Chain or Loop method. Each of these system are prone to failure and have several disadvantages over the CLA-HUB method that we have perfected. You can’t see the difference after the installation because everything is buried, but years down the road, each of these methods tend to fail faster and make it difficult to diagnose and repair a system.

The differences are clear:

• Secondary fuse for protection included at the HUB
• Only need to check voltage at the hub vs. every fixture
• One point of connection per home run
• Connections protected in direct burial enclosure
• Equal voltage to every lamp

  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest

Example of the CLA-HUB System

  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest

Typical Competitors Installation Methods:

  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest
  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest
  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest
  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest
  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest
  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest

See For Yourself How The CLA-HUB System Works

When you see how Custom Lighting of America installs your system, you’ll understand what sets us apart for a DIY installation and our competitors. Simplicity and attention to detail guarantees years of trouble free enjoyment our of your low voltage landscape lighting system using our CLA-HUB installation method:

  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest
  • Facebook
  • Twitter
  • Gmail
  • reddit
  • LinkedIn
  • StumbleUpon
  • Pinterest

The CLA-HUB Wiring System is the ultimate In-Line fuse protected wiring system whenever an installation calls for Unique Manufacturing lighting fixtures. Allowing our installers to size the fuse according to load or wire size, thus making troubleshooting accessible, convenient and fast for higher wattage lights. You wouldn’t purchase a home or an automobile without fuse protection… an outdoor lighting system warrants the same respect!

Your landscape lighting system not only needs to look beautiful, it should be trouble free and easy to maintain and service for the life of the system. Now that you know the CLA difference in a Unique lighting installation, why would you use anyone else? Give Harold a call at (561) 204-3000 to learn more about what makes a CLA installation the best landscape lighting system for the investment.

You May Also Like…

Pin It on Pinterest

Share This